ADF P200

The ADF P200 is one of the world’s fastest active filters. It can eliminate harmonic problems up to the 100th harmonic and works well in even very resonant grids. It is also excellent at mitigating interharmonics [interharmonics are harmonics between the integer harmonics], resonances, and supraharmonics [high frequency disturbances above 2-3 kHz]. The ADF P200 is available in a wall-mounted module of similar frame as PPM300.

With the increase in renewable energy sources, such as photovoltaic plants and wind farms, the amount of supraharmonics, interharmonics and resonances increase. This makes the ADF P200 a perfect solution for the modern grid and for microgrids.

Due to the form factor of the ADF P200, it can be integrated into an ADF P300 with 1-2 modules. It can also be used as a stand-alone wall-mounted active filter, just like the ADF P100.

The ADF P200 can be configured using the built-in WUI (Web User Interface). No software needs to be installed on your computer to perform commissioning. All that is needed is a computer with an ethernet port and an ethernet cable.

Each ADF P200 active filter is customized to maximize performance in each application. The common features that all systems share include:

APPLICATION FEATURES

Dynamic VAR compensation

Harmonic elimination

Resonance elimination

CONTROL FEATURES

Fully customizable harmonic compensation

Several ADF P200 units can be combined for higher power

Insensitive to network conditions

Cannot be overloaded

Fastest response time in the industry

PHYSICAL FEATURES

Standard enclosure format system, according to IP20, EN50298, EN60529, EN50102

High short circuit capacity

Simple installation

Modular and scalable design

The ADF P200 is compatible with all three-phase low voltage applications. It automatically eliminates harmonics and reactive displacement in a wide range of applications. The ADF P200 can also be tailored for unusual applications requiring special optimizations. Some typical applications include:

  • Offices and commercial buildings
  • Small and medium sized manufacturing companies
  • Fluorescent lamps
  • Medical equipment
  • Industrial loads
  • UPS systems
  • Fans
  • Drive systems

Technical Specifications –
ADF P200 for industrial three phase loads

ModelADF P200-120/480
Rated power*83 / 100 kVA
Optimization current capacity120 ARMS
System voltage208 – 480V
Nominal frequency50/60 Hz  ± 2%
Number of phases3 phase 3 wire
Connection type3 phase without neutral (TN, TT)
Harmonic current compensatedCurve-selectable harmonics, interharmonics compensation up to 5kHz (100th order)
Filter efficiencybetter than 97%
Current compensation of power factorup to 1.0
ExpandabilityADF P200 can be used in parallel
Response time< 20 μs
Power dissipation< 1200W
Maximum air flow requirement< 600 m3/h
Noise level< 70 dB(A)
Environment0 to 95% RH non-condensing, max altitude 1000 m without derating
Operating temperature0 to 50°C, up to 40°C  without derating
Dimensions230 x 1400 x 470 mm (W x H x D)
Weight90 kg
Enclosure colorRAL 7035 (light grey), RAL 5017 (traffic blue)
Protection classIP 20, IP21** according to IEC 529, other ratings upon request
Environmental conditionsChemical 3C3, mechanical 3S2
Electromagnetic CompatibilityEN61800-5-1, Class C2
CertificatesCE

 1 Optimization capacity at 400 V / 480 V nominal voltage

CONNECTION DIAGRAM

Connection Diagram ADF P200

DIMENSIONS

Dimensions ADF P200